In this post I will explain about the HP Printer Problem. Did you ever have a problem with your printer? I guarantee you've been there. Printer problem that I think is reasonable. but it is not fair if you are lazy to care. Printer problems become a classic that is often experienced by many people.
HP Printer Problem here is totally dead printer with indication lamp is not lit. This printer is one of the most stout printers in use around the world. For example in homes, offices and and others.
Ok. directly on the problems mentioned above.
- Damaged adapter. Check first with multitester output adapter, there is a voltage range of 32V and 15V output or not. If the adapter is damaged it must be replaced. damage to the adapter is usually rare.
- Board Damage. If this is not a flame indication lamp power at all. How to fix printer I will explain below.
- Unloading your HP printer and grab the board printer. see his picture as below.
- Then find the diode as I show in the picture above.
- Next check the diode with multitester.
- If the diode is damaged, seek common diode size 2 amperes. Then replace the damaged diode to diode is 2 amperes. Figure diode as below:
Once replaced, reassembled before the board, try to check first by plugging the adapter into this board. Turn on, and the lamp power if the lights flicker meant service was successful. But if it is still dead, and the diode you are still in good condition, meaning the damage has spread to the main board IC chipset this HP printer. If already hit the main IC, then you have to replace the damaged board with HP printers a new board, or if you are looking for trouble, please take it to an authorized service or you buy a new printer.
May be useful.....
May be useful.....
