Maybe any of you who are experiencing damage to a computer on the VGA card, which monitors only display the message Not Signal only when lit or in other words there is no display at all on the monitor. Then how to fix them step? The first time that you have to test the VGA card is to let go of the place and use the Onboard VGA if there is, it is to ensure that the VGA card that is the problem for sure, okay, let's start.
How to Solve Computer VGA Card not Detected
1. Remove the VGA card on the motherboard, then try cleaning VGA legs with rubber eraser (like RAM Memory), Clean Slot PCI / AGP VGA card you used to, after this step was taken, but not getting results then we try the second
2. Try to Clear CMOS method, a way to position Jumper Jump off and remove Cmos Battery 5 minutes, and then plug it again.
2. Remove the VGA, then reset the BIOS
4. Four ways to using other PC, it is used to perform test damage to the PCI / AGP VGA Card, if VGA can be used on other PCs, then the damage is in Slot PCI / AGP you, so take it to the case of Builders Services or replace your motherboard.
Some of the tricks I used to do to deal with problemsComputer VGA Card not Detected so there is no display on the monitor which is caused by damage to the VGA card, hopefully this short tutorial can be useful for those of you who are having problems like this.
